Slip Hazards? Think Tough.

Think Grip. Think Dino Grip

Call us now
1300 400 504

items(s) | $0.00

Anti-Slip Stair Nosings

(exc GST)
Price From: Excl. Tax: $4.04 Incl. Tax: $4.44

Dino Grip Stair Nosings are a fibreglass product that has been manufactured for an effective non-slip step edge, with a  highlighted nosing. Prefabricated and ready to install, Dino Grip Stair Nosings are the solution to slippery steps.

Dino Grip Anti-Slip Stair Nosings are manufactured from FRP (fibre reinforced plastic) / GRP (glass-fibre reinforced plastic) to provide an extremely tough and durable product.  These types of products have been used in the most testing environments.  

These Stair Nosings offer both a colour differentiation and an anti-slip solution for any step edge. They are easy to install and can be fitted to almost any step without creating a trip hazard. Suitable for DIY installations.


  • Adhesive Required
  • Anti Slip
  • DIY Installation
  • Foot Traffic
  • Indoor Use
  • Outdoor Use
  • Screw Driver Attachment
  • Spring Loaded Rivet Gun
  • Do It Yourself Installation
  • Anti-Slip Surface
  • Hard Wearing & Durable
  • Installs Over Virtually Any Step
  • Choice of Colours
  • Black
  • Brown
  • Buff
  • Yellow

Sizes

Two sizes are available, the 70mm x 30mm and a 55 x 55mm version is also available by special order.

Dino Grip Stair Treads are available from stock in lengths of 1000mm which can be cut to size as required.

A - 55mm
B - up to 3000mm
C - 55mm
BY SPECIAL ORDER ONLY

A - 30mm
B - up to 3000mm
C - 70mm

 

Anti-Slip

Dino Grip Stair Nosings are pre-formed fibreglass Nosings that have an anti-slip gritted top to provide an excellent slip-resistant and hard wearing surface.

Durable

Dino Grip Stair Nosings are manufactured from FRP (fibre reinforced plastic) / GRP (glass-fibre reinforced plastic) to provide an extremely tough and durable product.

Corrosion Resistant

Dino Grip Stair Nosings are resistant to a wide range of chemicals and are perfectly suited for use even in the most extreme environments. Chemical resistance guides are available on request.

Do it Yourself Installation

Dino Grip Stair Nosings are designed for easy installation onto most step edges.  The fact that they are supplied as a finished product means that it can be walked on straight away after installation thus keeping disruption to a minimum.

This product is ideal for do it yourself installations and is simply adhered and mechanically fixed into place.

Aesthetics

Dino Grip Stair Nosings provides an instant aesthetically pleasing non-slip finish to any step edge, which also provides a highlighted edge.

Tapered Back Edge

To ensure a flush fit with the existing substrate and to eliminate the possibility of a trip hazard, the product has been designed with a tapered back edge.

High Visibility Colours

Dino Grip Stair Nosings - GRP are designed to provide a contrasting colour to step edges. 

HOW TO INSTALL - GRP STAIR NOSINGS

 

STEP 1 - Preparation & Safety

When installing Dino Grip GRP Stair Nosings we recommend that PPE (personal protective equipment) is worn. 

The stairs should be dry and clean and free from any loose and defective material. If there are areas that are damaged these should be repaired so that the surface is flat and even. Undertake a dry fit of the nosing to ensure that it sits flat and is the correct size.


STEP 2 – Cutting Stair Nosings

The Stair Nosings should be cut externally or in well ventilated areas. If any further trimming is required, we recommend the use of a jigsaw, preferably fitted with a tungsten carbide blade or hand grinder.

Dust residue can be disposed of using normal waste disposal methods. No special permissions or licenses are required.

 

STEP 3 - Fixings & Tools

Stainless Steel Screws

Dino Grip can supply standard flanged stainless steel screws, which therefore do not rust, stain or create a trip hazard. 

Colour Headed Screws

Alternatively Dino Grip recommends our colour headed flanged screws that are available in yellow / brown or buff to match the chosen stair nosing colour. 

The advantage of using these particular screws is that they have a T-star head which makes for easier installation as they don’t round the heads off the screws during installation.

(For metal surfaces, we would recommend the use of rivet fixings)

Adhesive

Mechanical fitting is sufficient to secure Dino Grip Stair Nosings. However, we also recommend that an application of a high strength gap filling adhesive (PU230 or similar) to provide extra strength and a safeguard against failure of the mechanical fittings. 

The gap filling also promotes noise reduction when fitting over the existing surface. To apply the gap filling adhesive, run a 6mm bead around the perimeter of the stair nosing, and then horizontally across the stair nosing.

- Place the nosing immediately onto the substrate. 

- After 1 hour, a firm bond will be achieved under normal circumstances and drying conditions. 

- Secure with the mechanical fixings and allow the adhesive to cure for 12-24 hours before allowing excessive traffic to use the areas.

 

RECOMMENDED MECHANICAL FIXINGS

Based on a 1 metre Stair Nosing

Over Timber
No 8 x 4.8mm x 38mm – Flanged Stainless Steel Screws

Over Steel Plate

No 8 x 20mm Flanged Headed Rivets

Over Concrete

No 8 x Brown Raw Plugs (or equivalent)

No 8 x 4.8mm x 38mm – Flanged Stainless Steel Screws

Over Open Mesh

Stainless steel or zinc plated saddle clips and domed head bolts.

 

STEP 4 – Fitting Stair Nosings

Wooden Surfaces

Lay the Stair Nosings upon the surface and then use a 6mm masonry drill bit to drill the top of the gritted surface in the desired fixing locations.  We would recommend that there are approximately 8 fixings per 1 metre of stair nosing; however this would depend on the usage and installation location.

Once the pilot holes have been drilled, screw the stair nosings into position using the flanged stainless steel screws or colour headed screws.

Additional adhesive can be used (if require) to add extra grip to the underneath the stair nosing.

Metal Surfaces

To lay the stair nosing upon the surface and then use a 6mm masonry drill bit to drill the top of the gritted surface only in the desired fixing locations.  We would recommend that there are 8 fixings per 1 metre stair nosing.  Change the drill bit to a 5.5mm metal drill bit.  Use drilling compound, and then proceed to drill the metal surface under the stair nosing  – the stair nosing can be kept into position during this process as you have already pre-drilled the stair nosing. 

Place rivet into the hole and use a rivet gun to fix into position.  Please ensure that all rivets have been compressed. 

Additional adhesive can be used (if required) to add extra grip to the underneath of the stair tread.

Concrete Surfaces

Lay the stair nosing on top of the surface.  Use a 6mm masonry drill bit to drill the top of the gritted surface and into the underlying concrete sub-base only in the desired fixing locations.  We would recommend approximately 8 fixings per 1 metre of stair nosing; however this would depend on the usage and installation location.  Remove the stair nosing and re-drill the concrete fixing points with an 8mm masonry drill bit. 

Introduce raw-plugs into the holes in the concrete surface and place the stair nosing into place and screw into position using the flanged stainless steel screws.

Additional adhesive can be used (if required) to add extra grip to the underneath of the stair nosing.

Additional Adhesive

Whilst mechanical fixings are all that is required to secure the stair nosing, wherever possible, the application of an appropriate high strength gap filling adhesive will provide the following benefits:

A secondary fixing in the event that the mechanical fixings should fail.

A barrier against the "Drumming" noise that is created when fitting over the existing substrate. Apply a 6mm bead of high strength gap-filling adhesive around the periphery of the stair nosing and in horizontal stripes. Immediately press the stair nosing firmly to the substrate to ensure adequate transfer of adhesive. A firm bond will be achieved in about one hour under normal circumstances and conditions. Secure with the mechanical fixings and allow the adhesive sealant to cure before allowing excessive traffic to use the areas.

 

CLEANING GUIDE AND TIPS

Whilst Stair Nosings are extremely resilient to dirt and contaminations it will, as with most other things, become dirty.

Dry dirt and debris can easily be removed using a stiff brush and should be carried out on a regular basis.

If the Stair Nosings have been subjected to spillages or the dirt has become embedded, detergents can be used. It is always advisable to test any cleaning product on the Stair Nosings before starting the cleaning procedure. This can be done in an inconspicuous area of the installation.

Using the detergent, warm water and a suitable brush; scrub the affected areas until clean. This can then be washed off with clean water or by using a power washer.

Where circumstances allow, the Stair Nosings can be power washed without causing harm. Care should be taken when the stair nosing has been stuck down and / or edge sealed as very high pressure power washing or repeated power washing could cause damage to sealants and adhesives.

GENERAL ROUTINE MAINTENANCE

The security of the fixings / adhesives should be checked on a regular basis. Circumstances will vary, based upon the volume of foot traffic etc. but, as a guide, monthly inspections would be advisable in high trafficked areas

 

CHARACTERISTICS

  • Provides a highlighted step edge
  • Conforms to DDA Regulations (70mmx 30mm)
  • Slip Resistant Surface
  • Impact Resistant
  • Class 1 Flame Spread – Non Sparking
  • Corrosion Resistant
  • Lightweight
  • Non Metallic
  • Hard Wearing, Tough & Durable
  • Can be Cut to Size
  • Quick Installation
  • Manufactured to ISO 9001 

APPLICATIONS

Ideal for the installation on most step edges to provide an instant non-slip, highlighted nosing.

TECHNICAL DATA

Description

Slip Resistant Decking Profiles

Top Finish

Carbon and Silicon Grip Top Surface

Stock Colours

Yellow / Brown / Buff

Thickness

Nominally 4mm Thick

Chemical Resistance

Different Chemical Resistance Available, Please Call our Technical Department for Advice.

Panel Size

1000mm / 2000mm / 3000mm

70mm x 30mm or

55mm x 55mm

Weight of 1 Metre Stair Nosing

70mm x 30mm – 1.1kg

55mm x 55mm – 1.2kg

Service Temperatures

-20°c  to + 80°c

Load capabilities

Credited with no load bearing strength

Design Life

10+ Years (subject to traffic analysis)

General Use

Standard Pedestrian Traffic

SLIP RESISTANT LEVELS

Measured using the Pendulum test method (Four S rubber slider / 96 Slider) – standard simulated shoe sole.

Top Surface

Dry Reading

Wet Reading

Standard Grit Surface

80

75

The Slip Resistance Group guide to slip resistance of a floor for able bodied pedestrians.

Four S Pendulum Value

Potential for Slip

Above 65

Extremely Low

35 to 65

Low

25 to 65

Moderate

25 and Below

High

To ensure that the above slip resistant levels are maintained the stair nosing should be kept clean in accordance with the attached cleaning guide and tips. 

Additional Information

Install Videos N/A
You may also like
Excl. Tax: $6.14 Incl. Tax: $6.75
Grip Fill
Excl. Tax: $13.64 Incl. Tax: $15.00
Rivet Gun (Manual Operation)
Excl. Tax: $14.55 Incl. Tax: $16.00
Adhesive Gun